Whites DXF Bedienungsanleitung PDF herunterladen (Seite 31)

6. AutoTrac

AUTOTRAC

allows the instrument to automati-

cally readjust the Ground Balance setting during

searching. This readjustment allows for natural

occurring changes in the ground mineral of an

area. By maintaining an accurate Ground Balance,

detection depth and stability are enhanced. AUTO

TRAC

is recommended for typical search condi-

tions. If, however, a great deal of decomposed

man-made iron is encountered, AUTOTRAC

OFF,

or a reduced AUTOTRAC

SPEED is advised.

AUTOTRAC

operation is affected by TRAC

INHIBIT.

Tips -

Use ON for most

search conditions.

(G.E.B./Trac section)

7. Trac View

When ON, "TRACK" appears on right side of dis-

play when AUTOTRAC

makes adjustments to the

Ground Balance setting.

TRAC VIEW offers a way to observe Autotrack-

ing. When ON, "TRACK" will appear momentarily

on the right-hand side of the display just above the

SignaGraph

while AUTOTRAC

is adjusting.

This information is valuable when attempting to

determine an appropriate Trac Speed. It may also

be a valuable aid in determining the relative ground

conditions. Reoccurring "TRACK" would indicate

difﬁ cult ground. In average ground it is desirable

to see some

tracking

occur (see TRAC SPEED).

Tips -

Use when ex-

perimenting with different

TRAC SPEEDs to deter-

mine if, and how often,

AUTOTRAC

automatically

adjusts Ground Balance.

(G.E.B./Trac section)



Chapter 5 DFX

™

Pro Options

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Whites DXF Bedienungsanleitung Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Whites DXF